+86-769-85426311sales@stcby.com
Dongguan STC Machinery Equipment Co.,Ltd

Categories

Home > News > Content

Multipurpose Heat Presses Maintenance From Four O'clock!

Multipurpose Heat Presses maintenance from four o'clock!
1, after the completion of each class must be cleaned up Multipurpose Heat Presses, to keep the lift screw clean.
2, weekly on the worm, worm, lifting screw plus calcium base grease lubrication. Lifting screw and nut should always be filled with 30 # oil.
3, the cylinder oil surface should be maintained between 25mm ~ 45mm, such as the oil surface below 25mm should be filled with hydraulic oil, fuel tank, you must first in the upper and lower pad more than 100mm equal height block and then oiling operation
4, Multipurpose Heat Presses In addition to the need to pay attention to the operation, the same need for regular maintenance, after the completion of each class must clean up Multipurpose Heat Presses, to keep the lift screw clean.
 The most important part of the Multipurpose Heat Presses system is that the steam heating heats the hot plate with the vaporized latent heat of the steam and the hot water is heated with hot water to heat the hot plate. Over-hot water in its heat after use, you can re-use the cycle to re-use, because the hot water is recycled, the flow rate is relatively slow, relatively high thermal efficiency. Compared with the steam, with hot water to do heating medium is better, overheated water heating system comprehensive utilization of heat 40% -50%. In the temperature control, the hot water heating in addition to control the flow, but also by changing the temperature of the cycle of hot water to adjust the temperature, compared with steam heating, hot water heating can be more stringent control of temperature.
Since the superheated water is heated by the use of high-pressure saturated steam to heat the low-temperature water, a high-pressure boiler is required in addition to the need for a high-pressure hot water container.
Multipurpose Heat Presses on the one hand the complex equipment; on the other hand the system pressure is still relatively high, the heating system sealing performance requirements are relatively high; and hot water precipitation scale, the corrosion of the heating system. In order to prevent the tank, pipe and hot plate in the scale and corrosion, superheated water heating is best to use condensate, at least use soft water.
Multipurpose Heat Presses Since the use of superheated water and saturated steam as heat medium are required to operate under high pressure conditions, increasing the difficulty of equipment sealing and heating stability is low, so try to find a high temperature can be produced at atmospheric pressure or low pressure , And the heat capacity and the use of safe high-boiling substances as a heat medium, has been a matter of great concern. The 1930s found such a heating medium, which is the high temperature organic heating body, usually called heat oil or hot oil. China from the early 1970s on the Multipurpose Heat Presses technology research, during the eight five was listed as national energy promotion projects.
 Multipurpose Heat Presses The most important part of the heating system Multipurpose Heat Presses is that the steam heating heats the hot plate with the vaporized latent heat of the steam and the hot water is heated with hot water to heat the hot plate of. Over-hot water in its heat after use, you can re-use the cycle to re-use, because the hot water is recycled, the flow rate is relatively slow, relatively high thermal efficiency. Compared with the steam, with hot water to do heating medium is better, overheated water heating system comprehensive utilization of heat 40% -50%. In the temperature control, the hot water heating in addition to control the flow, but also by changing the temperature of the cycle of hot water to adjust the temperature, compared with steam heating, hot water heating can be more stringent control of temperature.
Since the superheated water is heated by the use of high-pressure saturated steam to heat the low-temperature water, a high-pressure boiler is required in addition to the need for a high-pressure hot water container.
On the one hand the equipment is complex; on the other hand the system pressure is still relatively high, the heating system sealing performance requirements are relatively high; and hot water precipitation scale, the corrosion of the heating system. In order to prevent the tank, pipe and hot plate in the scale and corrosion, superheated water heating is best to use condensate, at least use soft water.
Multipurpose Heat Presses Since the use of superheated water and saturated steam as heat medium are required to operate under high pressure conditions, increasing the difficulty of equipment sealing and heating stability is low, so try to find a high temperature can be produced at atmospheric pressure or low pressure , And the heat capacity and the use of safe high-boiling substances as a heat medium, has been a matter of great concern. The 1930s found such a heating medium, which is the high temperature organic heating body, usually called heat oil or hot oil. China from the early 1970s on the Multipurpose Heat Presses technology research, during the eight five was listed as national energy promotion projects.